WA Changes Tint Laws

At long last, some uniformity between ADR rules and state regulations regarding window tint requirements.

Just like in the Northern Territory, in Western Australia you are now (as of April 13th 2013) able to tint glass behind the driver (or the B pillar) to 20%VLT. The front windows as always must remain at 35% VLT. The laws have been revised to bring window tinting regulations in line with current ADR privacy glass standards. Let’s hope QLD and the other states come into line soon too.

Below is the information set out by the WA Dept of Transport:

The Road Traffic Code 2000 requires drivers to have an uninterrupted and undistracted view of the road and any traffic ahead and on each side of him or her; and he or she can obtain, in a rear-vision mirror or mirrors attached to the vehicle, a clear reflected view of every overtaking vehicle.

In recognition of the above, the West Australian Road Traffic (Vehicle Standards) Regulations 2002 restricts the level of tinting that may be applied to vehicle glazing.

Up until October 2004 most vehicles were restricted to using a tint where the overall transmittance was no less than 35% visible light transmission* (VLT). This policy has been relaxed in WA and a vehicle owner considering applying a tinted membrane to existing glazing may now use the following guidelines.


All vehicles

Tinted films are not allowed on the main part of the windscreen. A tinted band across the top of the windscreen is permitted providing it is above the portion of the windscreen swept by the wipers and it does not intrude into the primary vision area of the windscreen. The band area must not be more than 10% of the windscreen area unless the Vehicle Safety and Standards Section have provided written permission.

Visible light transmission (VLT) is the measure of the amount of light that passes through a window. 35% VLT means 35% of the available light passes through both the window and the tint membrane together, and the rest of the light is blocked.

Passenger Vehicles

A minimum of 20% VLT tint can now be applied to windows behind the B pillar provided that external rear vision mirrors complying with ADR14 are fitted to the exterior on each side of the vehicle.

Note: All windows whether tint has been applied or not forward of the “B” pillar must have a VLT of at least 35%.

Tinted film must not be reflective or mirror like as it can dazzle other drivers by reflecting sunlight or headlight beams. The Road Traffic (Vehicle Standards) Rules 2002 limit the reflectance of window tint film to 10%. Again, you may be subject to receiving a compliance notice or an immediate fine for contravening the Road Traffic (Vehicle Standards) Regulations 2002.

´┐╝Fitment of clear film (security film etc.) to the glass of vehicles is acceptable provided the VLT (as applicable) is maintained.

For more information on regulations for your particular state, visit  http://www.wfaanz.org.au/regulations-automotive/

Comments are closed.